Why Painted Wood Rots and Why It Matters
When caulk cracks, paint peels, or water finds a gap around a window or at the base of a fascia board, the wood underneath soaks it up and starts to rot. Left alone, dry rot spreads. What starts as a soft corner on a window sill can work its way into structural trim before most homeowners notice it. Wood siding, fascia, and window and door trim that have been repainted over the years without proper prep — scraping, caulking, and spot repairs — can hide significant rot behind intact-looking paint. When the paint finally fails, the damage underneath can be extensive.
What Dry Rot Repair Actually Involves
Paint cannot fix rotted wood. Painting over soft or damaged wood traps moisture and makes the problem worse faster. The right process is to cut out the damaged material, replace it with new wood sized and profiled to match, seal every joint, prime the bare wood, and then paint. Done properly, the repair disappears into the rest of the surface.
The work The Painter does on a repair job includes:
- Dry-rot replacement — siding, trim, and fascia boards removed and replaced to match the existing profile
- Window and door trim — rot cut out and rebuilt, then sealed so water cannot get back in
- New siding paint — board-and-batten, lap siding, and T1-11 painted to match or refreshed as part of a larger job
- Deck sealing — decks cleaned, stained, and sealed
- ADUs and outbuildings — granny units, studios, and sheds get the same care as the main home
- Caulk and prime — every repair sealed before any paint goes on
Brian, who owns The Painter, comes out for the estimate himself. He looks at the surfaces, shows you what he finds, and explains what needs to be replaced. There are no surprises in the written estimate that follows.
From First Call to Finished Repair in Orangevale
The process is straightforward. You call or text The Painter, or send a request online. Brian gets back to you fast — often the same day — and schedules a time to come out and look at the surfaces in person. He walks the exterior, checks the areas you are concerned about, and looks for damage you may not have spotted yet — rot often hides behind intact paint until you press on it.
After the visit you receive a written estimate that spells out what is being replaced, how the repair will be prepped, and what the finished work will look like. Once work starts, every repair is caulked and primed before paint goes on. At the end, Brian and his project manager Josh walk the job with you and address anything you want touched up. The goal is a repair that blends in so well you forget it was ever there.
What Drives Cost and Timeline on a Repair Job
No two dry rot jobs are the same, and quoting a number without seeing the wood would not be fair to you. The main factors that affect what a job costs and how long it takes include:
- How much wood is damaged — a single window sill is a different scope than multiple fascia runs and several siding panels
- Where the damage is — trim at ground level is faster to reach than fascia at the roofline
- What is beneath the surface — once damaged boards come off, the framing underneath is inspected; hidden damage changes the scope
- Whether painting is included — many Orangevale homeowners combine a repair with a partial or full exterior repaint, which affects scheduling
The best way to know what your project will cost is to get a free estimate. Brian comes out, looks at the actual wood, and gives you a written price before any work begins.
What to Look for When Choosing a Siding Repair Contractor
Dry rot repair done poorly looks fine for a season and then fails again. The key things to look for in a contractor are a California contractor's license (you can verify it on the CSLB website), proof of insurance, and a written estimate that describes the prep — not just the paint. If an estimate does not mention caulking, priming, and what specifically is being replaced, the contractor may be planning to paint over the problem rather than fix it.
The Painter is licensed under CSLB #1001415 and insured. Brian has more than 30 years of experience and comes out for every estimate himself, so you are talking to the person responsible for the work. The company has a 5.0 rating across 44 Google reviews, and 100% of Facebook reviewers recommend them.
How to Get Started
If you have peeling paint, soft wood, or siding that looks like it has seen better days, the right move is to get eyes on it before it spreads. The Painter offers free estimates for dry rot repair and siding work throughout Orangevale and the greater Sacramento area. Call or text (916) 743-1743, or send a request online. Brian will get back to you fast — often the same day — and set up a time to come look at the job in person.
Frequently asked questions
Can you paint over dry rot instead of replacing the wood?
No. Paint applied over rotted wood traps moisture and makes the rot spread faster. The damaged wood needs to come out and be replaced with new material before any primer or paint goes on.
How do I know if I have dry rot if the paint looks okay from the street?
The surface paint can look intact while the wood underneath is already soft. Pressing on trim, fascia, or siding with your thumb can reveal soft spots. Brian comes out for a free estimate and checks the surfaces in person, including areas that are not obvious from ground level.
Do you handle the painting after the repair, or do I need a separate contractor?
The Painter handles both the repair and the painting. After the new wood is in place, it is caulked, primed, and painted to match the surrounding surface so the repair blends in.
Can a repair job be combined with a full exterior repaint?
Yes, and many Orangevale homeowners do exactly that. Dry rot repair and a full exterior repaint are handled together, which is often more efficient and gives you a consistent finish across the whole house.
Is The Painter licensed and insured to do this work in California?
Yes. The Painter holds California contractor's license CSLB #1001415 and is insured. You can look up the license on the CSLB website before you hire.

